Mercenarys' note

Ultra96v2 AP

• wifi AP
  • username: xilinx@192.168.2.1
  • password: xilinx
• USB AP
  • username: xilinx@192.168.3.1

Deployment settings

• install bitstring: sudo pip3 install bitstring

Connect Ultra96v2 to wifi

Step 1

• Use JTAG adapter to reach device (serial connection)
• Use Putty to connect serial devices
  • Serial line : COM5     //can be check in device manager of your host machine
  • Speed (baud): 115200
  • Data bits : 8
  • Stop bits : 1
  • Parity : None
  • Flow control: None
  • if connection is built after system completely boot, hit Enter to check system response

Step 2

• Check if the wifi is detected

  $ sudo iwlist wlan0 | grep SSID
  

  • if the SSID name is not shown, make sure your wifi AP provides 2.4HGz band (can be adjust in hotspot setting)
• Connect to wifi via pynq

  sudo python3                        # enter python shell with sudo 
  from pynq.lib import Wifi
  port = Wifi()
  port.connect('SSID','PASSWORD',force=True)